ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА ЗАМЕНА


  1. REMOVE V-RIBBED BELT

    Click here

  2. REMOVE RESONATOR BRACKET SUB-ASSEMBLY


    1. A01GJHX

      Remove the bolt and resonator bracket sub-assembly.

  3. REMOVE CRANKSHAFT PULLEY


    1. A01GMVCE01

      Using SST, loosen the crankshaft pulley set bolt.

      SST
      09213-54015   ( 90119-08216 )
      09330-00021
    2. A01GN76E01

      Using the pulley set bolt and SST, remove the crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05010, 09954-05010 )

  4. REMOVE CRANKSHAFT TIMING GEAR KEY


    1. A01GJIJ

      Remove the crankshaft timing gear key from the crankshaft.

  5. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01GN6J

      Remove the timing chain case oil seal with a screwdriver.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the timing chain case oil seal press fit hole and crankshaft.

  6. INSTALL TIMING CHAIN CASE OIL SEAL


    1. A01GIUWE01

      Using SST, tap in a new timing chain case oil seal until its surface is flush with the timing chain case edge.

      SST
      09223-22010
      09506-35010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap timing chain case oil at an angle.

  7. INSTALL CRANKSHAFT TIMING GEAR KEY


    1. A01GJIJ

      Install the crankshaft timing gear key.

  8. INSTALL CRANKSHAFT PULLEY


    1. Align the pulley set key with the key groove of the pulley, and slide on the pulley.

    2. A01GNCEE02

      Using SST, install the pulley bolt.

      SST
      09213-54015   ( 90119-08216 )
      09330-00021
      Torque:
      300 N*m  { 3059 kgf*cm, 221 ft.*lbf }

  9. INSTALL RESONATOR BRACKET SUB-ASSEMBLY


    1. A01GJHX

      Install the resonator bracket sub-assembly with the bolt.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  10. INSTALL V-RIBBED BELT

    Click here