Click here

ПЕДАЛЬ АКСЕЛЕРАТОРА УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL ACCELERATOR PEDAL


    1. A01GLWIE01

      Engage the 3 claws and install the new accelerator pedal.

      Table 1. Text in Illustration
      *1 Accelerator Pedal
      *2 Accelerator Pedal Support Bracket
      *3 Spring
      A01GKOV Front of Vehicle
      A01GNZA Push
      A01GN9I Front of Vehicle
      Note:

      Securely insert a new accelerator pedal into the accelerator pedal support bracket.

  2. Click here

    INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note:

    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.

    • Avoid physical shocks to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.


    1. Connect the tip of the accelerator pedal sensor assembly to the bracket.

    2. Install the accelerator pedal sensor assembly with the 3 nuts.

      5.4 N*m 55 kgf*cm 48 in.*lbf

    3. Connect the accelerator pedal sensor assembly connector.