Click here

ECM СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE COWL TOP VENTILATOR LOUVER RH


    1. Расцепите 6 фиксаторов и снимите правую вентиляционную решетку в верхней части кожуха.

  2. Click here

    PRECAUTION

    Note:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE AIR CLEANER INLET COVER


    1. Снимите 5 фиксаторов, обозначенные A.

    2. Поднимите крышку входного патрубка воздушного фильтра, чтобы отцепить 4 фиксатора В, и снимите крышку.

  5. Click here

    REMOVE ENGINE ROOM SIDE COVER LH


    1. A01GKBH

      Освободите 5 фиксаторов и снимите левую боковую крышку моторного отсека.

  6. Click here

    REMOVE ENGINE ROOM ECU COVER

    Note:

    • Wipe off any water on or around the engine room ECU cover.

    • Perform these procedures in a dry place away from rain, etc.

    • Do not allow water to enter the ECM through its connectors areas, screw areas, etc.


    1. Remove the 3 bolts and engine room ECU cover.

  7. Click here

    REMOVE TCM


    1. Disconnect the 4 TCM connectors.

    2. Remove the 2 nuts and TCM.

  8. Click here

    REMOVE ECM


    1. Disconnect the 6 ECM connectors.

    2. Remove the 2 nuts and ECM.