REAR CONSOLE BOX (for 4-Passenger with Ottoman) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR SEAT CONSOLE ARMREST ASSEMBLY


    1. Connect the connector.

    2. Install the rear seat console armrest assembly with the 2 screws.

    3. Install the 8 nuts and 2 bolts.

  2. INSTALL REAR SEAT CONSOLE ARMREST COVER

    A01GWFS

    1. Install the rear seat console armrest cover.

  3. INSTALL REAR SEAT CONSOLE TABLE ASSEMBLY


    1. Install the rear seat console table assembly with the 2 nuts and 2 bolts.

  4. INSTALL REAR SEAT CONSOLE TABLE COVER


    1. A01H0MVE04

      Push down the rear seat console table cover and attach the 2 hooks.

    2. Attach the 2 claws to install the rear seat console table cover.

  5. INSTALL REAR POWER SEAT SWITCH


    1. Install the rear power seat switch to the rear seat console panel assembly with the 4 screws.

  6. INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY


    1. Connect the connector.

    2. Attach the 6 clips to install the rear seat console panel assembly.

  7. INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH

    A01H1B4

    1. While lowering the rear seat console armrest garnish LH, attach the 3 claws and 2 clips to install it.

  8. INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH

    Tech Tips

    Use the same procedures described for the LH side.

  9. INSTALL REAR SEAT CONSOLE BOX ASSEMBLY


    1. Connect the connector.

    2. A01GXUV

      Move the rear seat console box assembly in the direction of the arrow shown in the illustration, and attach the 2 clips. Then install it with the 6 bolts.

    3. Install the service plug cover with the 4 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    4. Attach the 4 clips to install the rear seat console box front panel.

  10. INSTALL REAR SEAT LOWER CONSOLE BOX COVER


    1. Attach the 2 hooks and 4 claws to install the rear seat lower console box cover.