FRONT CONSOLE BOX (w/ Disc Player) REASSEMBLY

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. Install the No. 2 console box mounting bracket with the 2 bolts.

  2. INSTALL NO. 2 CONSOLE BOX DUCT


    1. Install the No. 2 console box duct with the 2 clips.

  3. INSTALL DISC PLAYER ASSEMBLY


    1. Connect each connector.

    2. Install the disc player with the 4 bolts.

  4. INSTALL FRONT NO. 1 CONSOLE BOX LENS


    1. Attach the 2 claws to install the front No. 1 console box lens.

  5. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. Attach the 2 claws to install the console box illumination light assembly.

    2. Connect the connector.

  6. INSTALL CONSOLE BOX WIRE


    1. Attach the 2 wire harness clamps to install the console box wire.

    2. Connect the connector.

  7. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY


    1. Install the console compartment door hinge sub-assembly with the 4 screws.

    2. Attach the 8 claws to install the console compartment door lock.

    3. Install the 4 screws.

    4. Install 4 new seals.

  8. INSTALL REAR CONSOLE ARMREST ASSEMBLY


    1. Install the rear console armrest assembly together with the bracket with the 6 screws.

    2. Attach the wire harness clamp.

  9. INSTALL LOWER CONSOLE BOX POCKET


    1. Attach the 6 claws to install the lower console box pocket.

  10. INSTALL CONSOLE BOX REGISTER ASSEMBLY


    1. Attach the 10 claws to install the console box register assembly to the console box ornament.