REAR SUNSHADE SYSTEM Only Rear Switch Cannot Operate Rear Sunshade

DESCRIPTION

A rear sunshade signal is sent from the rear power seat switch to the luggage room junction block assembly (rear junction block ECU) through CAN communication, and the rear sunshade operates.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC (CAN COMMUNICATION SYSTEM)

   
   

   1. Clear the DTCs Click here.

   2. Check for DTCs Click here.

      Result

      Result	Proceed to
      No DTC is output	A
      DTC U0210 is output (for LHD)	B
      DTC U0210 is output (for RHD)	C

      Tech Tips

      replacing the rear power seat switch, refer to the procedures below.

      
      

      • for Power Seat : Click here.

      • for 4-Passenger with Ottoman : Click here.

      • for 5-Passenger with Ottoman : Click here.

      • for for Fixed Seat Type : Click here.

   
   

   B

   GO TO CAN COMMUNICATION SYSTEM Click here

   C

   GO TO CAN COMMUNICATION SYSTEM Click here

   A

   END (REAR POWER SEAT SWITCH IS DEFECTIVE)