TRUNK LID ACTUATOR INSTALLATION

INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY
1. Install the luggage closer motor assembly with the 3 bolts and nut.
  
  Torque:
  
  5.5 N*m { 55 kgf*cm, 49 in.*lbf }
2. Connect the connector.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
1. Install the luggage compartment trim cover assembly LH with the claw and 2 clips.
INSTALL REAR FLOOR FINISH PLATE
1. Attach the 4 clips to install the rear floor finish plate.
2. Install the 3 clips.
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
1. Text in Illustration
  
  *A w/o Rear Cooler
  
  *B w/ Rear Cooler
  
  Attach the 4 claws to install the front luggage compartment trim cover.
2. Install the 3 clips.
INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)
1. Attach the 5 clips to install the No. 1 cooler cover.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws to Install the No. 1 luggage compartment light assembly.

Text in Illustration
*A	w/o Rear Cooler
*B	w/ Rear Cooler

INSTALL DECK TRIM SIDE BOARD RH

Text in Illustration
*A	w/ Spare Tire
*B	w/o Spare Tire

w/ Spare Tire:

INSTALL ROPE HOOK ASSEMBLY
1. Install the 4 rope hook assemblies with the 4 bolts.
INSTALL ROPE HOOK
1. Install the 4 rope hooks.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

Text in Illustration
*A	for Standard
*B	for Ottoman