TRUNK LID ACTUATOR REMOVAL


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Detach the 2 clips and remove the deck trim side board LH.

  5. REMOVE BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman
      *1 Fastening Tape

      Detach the clip, fastening tape and remove the battery service hole cover LH.

  6. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here

  7. REMOVE ROPE HOOK ASSEMBLY


    1. A01GWVA

      Remove the 4 bolts and 4 rope hook assemblies.

  8. REMOVE ROPE HOOK


    1. A01GYPFE01

      Remove the 4 rope hooks by pushing the claws in the direction of the arrows in the illustration.

  9. REMOVE DECK TRIM SIDE BOARD RH


    1. A01GX0VE03
      Text in Illustration
      *A w/ Spare Tire
      *B w/o Spare Tire

      w/ Spare Tire:


      1. Remove the clip.

      2. Remove the deck trim side board RH.

    2. w/o Spare Tire:


      1. Detach the clip and remove the deck trim side board RH.

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    A01H29BE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the No. 1 luggage compartment light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Disconnect the connector.

  11. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler)


    1. A01GZDY

      Detach the 5 clips and remove the No. 1 cooler cover.

  12. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A01GZ3DE02
      Text in Illustration
      *A w/o Rear Cooler
      *B w/ Rear Cooler

      Remove the 3 clips.

    2. Detach the 4 claws and remove the front luggage compartment trim cover.

  13. REMOVE REAR FLOOR FINISH PLATE


    1. A01GW5P

      Remove the 3 clips.

    2. Detach the 4 clips and remove the rear floor finish plate.

  14. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A01H0Y9

      Remove the 2 clips.

    2. Detach the claw and luggage compartment trim cover assembly LH.

  15. REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY


    1. A01GXCR

      Disconnect the connector.

    2. Remove the 3 bolts and nut.

    3. Remove the luggage closer motor assembly.