LUGGAGE DOOR OPENING SWITCH INSTALLATION


  1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY


    1. A01H125

      Attach the 2 claws and luggage door opening switch assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 5 clips and claw to install the No. 1 instrument panel safety pad sub-assembly.

    3. Install the screw <C> and bolt.

    4. A01GX5F

      Attach the claw to install the switch base hole cover to the No. 1 instrument panel safety pad sub-assembly.

  3. INSTALL INSTRUMENT PANEL ORNAMENT

    A01GXLS

    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel ornament.

  4. INSTALL INSTRUMENT SIDE PANEL LH

    A01H1M2

    1. Attach the 6 clips to install the instrument side panel LH.

  5. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI