FRONT DOOR ON-VEHICLE INSPECTION


  1. INSPECT FRONT DOOR PANEL SUB-ASSEMBLY LH


    1. Check that the clearance measurements of areas A to L are within the standard range.

      A01GXMGE01
      Standard
      Area Specified Condition Area Specified Condition
      A 4.35 to 7.35 mm (0.171 to 0.289 in.) B -0.85 to 2.15 mm (-0.0335 to 0.0846 in.)
      C 4.35 to 7.35 mm (0.171 to 0.289 in.) D -1.15 to 1.85 mm (0.0453 to 0.0728 in.)
      E 4.35 to 7.35 mm (0.171 to 0.289 in.) F -0.85 to 2.15 mm (-0.0335 to 0.0846 in.)
      G 2.7 to 5.7 mm (0.106 to 0.224 in.) H -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
      I 3.0 to 5.4 mm (0.118 to 0.213 in.) J -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)
      K 2.8 to 5.2 mm (0.110 to 0.205 in.) L -1.0 to 1.0 mm (-0.0394 to 0.0394 in.)