HOOD SUPPORT DISPOSAL

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. DISPOSE OF HOOD SUPPORT ASSEMBLY


    1. Horizontally fix the hood support in a vise with the piston-rod pulled out.

    2. A01H01KE01

      Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw and gradually release the gas.

      Note

      Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.