LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY INSTALLATION

INSTALL LUGGAGE DOOR CLOSER ASSEMBLY
1. Connect the cable.
2. Install the luggage door closer assembly with the 3 bolts.
  
  Torque:
  
  5.5 N*m { 56 kgf*cm, 49 in.*lbf }
3. Connect the connector.
INSTALL BACK DOOR TRIM COVER
1. Attache the 10 clips to install the back door trim cover.
2. Install the 4 clips.
INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH
1. Install the luggage compartment door hinge cover LH with the 3 clips.
INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL REAR COMBINATION LIGHT SERVICE COVER LH
1. Attach the 3 claws to install the rear combination light service cover LH.
INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

Tech Tips

Use the same procedure described for the LH side.
INSTALL NO. 2 COURTESY LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws to install the No. 2 courtesy light assembly.
INSTALL SWITCH BEZEL
1. Attach the 2 claws to install the switch bezel.
INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP
1. Install the luggage compartment door assist grip with the 2 screws.
2. Attach the 3 claws.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

Text in Illustration
*A	for Standard
*B	for Ottoman