POWER TRUNK LID SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

INSPECT AUXILIARY BATTERY VOLTAGE

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.

NEXT

CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

1. Use the intelligent tester to check if the CAN communication system is functioning normally.

   Result:

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output (for LHD)	B
   CAN DTC is output (for RHD)	C

   
   

   B

   Go to CAN COMMUNICATION SYSTEM (for LHD) Click here

   C

   Go to CAN COMMUNICATION SYSTEM (for RHD) Click here

   A

CHECK FOR DTC*

1. Check for DTCs Click here.

2. Clear the DTCs Click here.

3. Recheck for DTCs Click here.

   OK
   DTC is not output.

   
   

   NG

   Go to DIAGNOSTIC TROUBLE CODE CHART Click here

   OK

PROBLEM SYMPTOMS TABLE

1. Refer to Problem Symptoms Table.

   Result:

   Result	Proceed to
   Fault is not listed on problem symptoms table	A
   Fault is listed on problem symptoms table	B

   
   

   B

   ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

   A

OVERALL ANALYSIS AND TROUBLESHOOTING*

1. Operation check Click here

2. Terminals of ECU Click here

3. Data List / Active Test Click here

   
   

   NEXT

REPAIR OR REPLACE

NEXT

CONFIRMATION TEST

NEXT