REAR SEATBACK HEATER (for Fixed Seat Type) INSPECTION


  1. INSPECT BENCH TYPE REAR SEATBACK COVER


    1. for LH Side:


      1. A01H1MDE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (Seatback Part))

        Check the resistance of the bench type rear seatback cover (seatback part).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω

        If the result is not as specified, replace the bench type rear seatback cover.

      2. A01GZ04E01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (LH Side))

        Check the resistance of the bench type rear seatback cover (LH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.6 to 17.8 Ω

        If the result is not as specified, replace the bench type rear seatback cover.

      3. A01GZ04E01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (RH Side))

        Check the resistance of the bench type rear seatback cover (RH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.5 to 17.7 Ω

        If the result is not as specified, replace the bench type rear seatback cover.

    2. for RH Side:


      1. A01H1MDE01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (Seatback Part))

        Check the resistance of the bench type rear seatback cover (seatback part).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        2 - 8

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω
        7 - 4

        17 to 23°C

        (63 to 73°F)

        		 1.4 to 1.7 Ω

        If the result is not as specified, replace the bench type rear seatback cover.

      2. A01GZ04E01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (LH Side))

        Check the resistance of the bench type rear seatback cover (LH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.6 to 17.8 Ω

        If the result is not as specified, replace the bench type rear seatback cover.

      3. A01GZ04E01
        Text in Illustration
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover (RH Side))

        Check the resistance of the bench type rear seatback cover (RH side).

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2

        17 to 23°C

        (63 to 73°F)

        		 14.5 to 17.7 Ω

        If the result is not as specified, replace the bench type rear seatback cover.