REAR SEAT RETURN SWITCH INSPECTION


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Power Seat)


    1. A01GYZ7E01
      Text in Illustration
      *1 Rear Seat Return Switch
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Rear Seat Return Switch))

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        5 - 9

        Rear seat return switch on

        (Pushed)

        		 Below 1 Ω
        5 - 9

        Rear seat return switch off

        (Not Pushed)

        		 10 kΩ or higher

        If the result is not as specified, replace the integration control and panel assembly (rear seat return switch).

    2. A01GYZ7E02
      Text in Illustration
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Rear Seat Return Switch))

      Inspect the illumination operation.


      1. Apply battery voltage to the integration control and panel assembly (rear seat return switch) connector, and check that the integration control and panel assembly (rear seat return switch) LED illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 12 (ILL+)

        Battery negative (-) → Terminal 10 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the integration control and panel assembly (rear seat return switch).

  2. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Ottoman)


    1. A01GWXLE03
      Text in Illustration
      *1 Rear Seat Return Switch
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Rear Seat Return Switch))

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        5 - 9

        Rear seat return switch on

        (Pushed)

        		 Below 1 Ω
        5 - 9

        Rear seat return switch off

        (Not Pushed)

        		 10 kΩ or higher

        If the result is not as specified, replace the integration control and panel assembly (rear seat return switch).

    2. A01GWXLE02
      Text in Illustration
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (Rear Seat Return Switch))

      Inspect the illumination operation.


      1. Apply battery voltage to the integration control and panel assembly (rear seat return switch) connector, and check that the integration control and panel assembly (rear seat return switch) LED illuminates.

        OK
        Condition Specified Condition

        Battery positive (+) → Terminal 12 (ILL+)

        Battery negative (-) → Terminal 10 (ILL-)

        		 LED illuminates

        If the result is not as specified, replace the integration control and panel assembly (rear seat return switch).