SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

INSTALL SEAT VIBRATOR MODULE ASSEMBLY
1. Install the module with the 3 bolts.
  
  Torque:
  
  9.8 N*m { 100 kgf*cm, 87 in.*lbf }
2. Connect the connector.
3. Attach the wire harness clamp.
4. Attach the 2 claws to connect the air hose connector.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
1. Install the luggage compartment trim cover assembly LH with the claw and 2 clips.
INSTALL REAR FLOOR FINISH PLATE
1. Attach the 4 clips to install the rear floor finish plate.
2. Install the 3 clips.
INSTALL TOOL BOX (w/o Spare Tire)
1. Install the tool box with the 2 clips.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
1. Text in Illustration
  
  *A w/o Rear Cooler
  
  *B w/ Rear Cooler
  
  Attach the 4 claws to install the front luggage compartment trim cover.
2. Install the 3 clips.
INSTALL NO. 1 COOLER COVER
1. Attach the 5 clips to install the No. 1 cooler cover.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws to Install the No. 1 luggage compartment light assembly.

Text in Illustration
*A	w/o Rear Cooler
*B	w/ Rear Cooler

INSTALL DECK TRIM SIDE BOARD RH

Text in Illustration
*A	w/ Spare Tire
*B	w/o Spare Tire

w/ Spare Tire:

INSTALL ROPE HOOK ASSEMBLY
1. Install the 4 rope hook assemblies with the 4 bolts.
INSTALL ROPE HOOK
1. Install the 4 rope hooks.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
CHECK REAR SEAT ASSEMBLY
1. Check the seat vibration system Click here.

Text in Illustration
*A	for Standard
*B	for Ottoman