POWER SEAT SWITCH (for Center Console Side) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01H258

      Attach the 6 claws to install the integration control and panel assembly (power seat switch).

    2. Connect the connector.

  2. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    A01H1P8

    1. Connect each connector and attach each wire harness clamp.

    2. Attach the 6 clips to install the upper rear console panel sub-assembly.

    3. Install the 2 screws.

  3. INSTALL NO. 3 BOX PANEL


    1. Attach the 4 claws to install the No. 3 box panel.

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A01GZSN

    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the rear part of the instrument panel finish panel end LH 3 clips.

    2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. CHECK REAR SUNSHADE SYSTEM

    Click here

  8. CHECK REAR DOOR SUNSHADE SYSTEM

    Click here

  9. CHECK CLIMATE CONTROL SEAT SYSTEM

    Click here

  10. CHECK FRONT POWER SEAT CONTROL SYSTEM

    Click here

  11. CHECK REAR POWER SEAT CONTROL SYSTEM

    Click here