Click here

POWER SEAT SWITCH (for Center Console Side) INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01H258

      Attach the 6 claws to install the integration control and panel assembly (power seat switch).

    2. Connect the connector.

  2. Click here

    INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector and attach each wire harness clamp.

    2. Attach the 6 clips to install the upper rear console panel sub-assembly.

    3. Install the 2 screws.

  3. Click here

    INSTALL NO. 3 BOX PANEL


    1. Attach the 4 claws to install the No. 3 box panel.

  4. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

  5. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the rear part of the instrument panel finish panel end LH 3 clips.

    2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.

  6. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tip:

    Use the same procedure described for the LH side.

  7. Click here

    CHECK REAR SUNSHADE SYSTEM

    (Click here)

  8. Click here

    CHECK REAR DOOR SUNSHADE SYSTEM

    (Click here)

  9. Click here

    CHECK CLIMATE CONTROL SEAT SYSTEM

    (Click here)

  10. Click here

    CHECK FRONT POWER SEAT CONTROL SYSTEM

    (Click here)

  11. Click here

    CHECK REAR POWER SEAT CONTROL SYSTEM

    (Click here)