REAR SEAT ASSEMBLY (for Ottoman) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH


    1. A01H1Y2

      Remove the 22 hog rings and rear seat cushion spring assembly LH from the rear seat cushion cover with pad LH.

  2. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH


    1. A01GZ4H

      Remove the 15 hog rings and separate type rear seat cushion cover LH from the rear seat cushion pad LH.

  3. REMOVE REAR SEAT SHOULDER BELT GUIDE LH


    1. A01GZLL

      Remove the 3 screws and rear seat shoulder belt guide LH.

  4. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. A01GWUN

      Remove the 2 pins and rear seat headrest assembly.

      Tech Tips

      Use the same procedure to remove the rear seat headrest assembly on the other side.

  5. REMOVE REAR SEAT HEADREST SUPPORT


    1. A01GY11

      Detach the 4 claws to remove the 2 rear seat headrest supports.

      Tech Tips

      Use the same procedure to remove the rear seat headrest support on the other side.

  6. REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

    A01GX1O

    1. Detach the wire harness clamp and disconnect the 2 connectors.

    2. Remove the 2 bolts.

    3. Detach the 2 claws to remove the rear No. 1 seat headrest adjuster sub-assembly LH.

      Tech Tips

      Use the same procedure to remove the rear No. 1 seat headrest adjuster sub-assembly on the other side.

  7. REMOVE POSITION CONTROL ECU ASSEMBLY

    A01GXM9

    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and position control ECU assembly.

      Tech Tips

      Use the same procedure to remove the position control ECU assembly on the other side.

  8. REMOVE REAR SEAT CLIMATE CONTROL ECU LH

    A01H0DD

    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and rear seat climate control ECU LH.

  9. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY


    1. Disconnect the connector.

    2. Detach the guide and remove the seat heater control sub-assembly.

      Tech Tips

      Use the same procedure to remove the seat heater control sub-assembly on the other side.

  10. REMOVE REAR SEAT COVER CAP LH


    1. A01H22F

      Detach the 5 claws to remove the rear seat cover cap LH.

  11. REMOVE REAR SEAT LOCK BASE LH


    1. A01H0K4

      Remove the 3 screws and rear seat lock base LH.

  12. REMOVE REAR SEATBACK COVER WITH PAD LH


    1. Remove the nut and detach the seatback cover bracket.

    2. Disconnect the connector.

    3. Detach the 8 hooks and remove the 19 hog rings and rear seatback cover with pad LH from the rear seatback spring assembly LH.

      A01H0KCE01
      Text in Illustration
      *1 Seatback Cover Bracket *2 Hook

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH

    A01H0L1

    1. Remove the 10 hog rings and separate type rear seatback cover LH from the rear seatback pad LH.

  14. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER LH

    A01GWHJE02
    Text in Illustration
    *1 Felt Pad

    1. Remove the felt pad.

    2. Disconnect the 3 connectors and detach the wire harness clamps.

    3. Remove the 3 nuts.

    4. Remove the 2 screws and rear seatback climate control blower LH.

  15. REMOVE REAR SEAT WIRE LH

    A01GXEE

    1. Disconnect the 3 connectors.

    2. Detach the wire harness clamps to remove the rear seat wire LH.

  16. REMOVE REAR SEAT INNER BELT ASSEMBLY LH


    1. A01H1OOE01

      w/o Illumination

      Remove the bolt and rear seat inner belt assembly LH.

    2. A01GX9A

      w/ Illumination


      1. Disconnect the connector and detach the 2 claws.

      2. A01H1J8E01

        Detach the clamp.

      3. Remove the bolt and rear seat inner belt assembly LH.

  17. REMOVE REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH


    1. A01GW6I

      Remove the nut and rear seat belt inner anchor bracket assembly LH.

  18. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH


    1. A01GYB6

      Remove the rear No. 2 seat cushion pad.

    2. A01H0FQ

      Detach the 2 wire harness clamps and disconnect the 2 connectors.

    3. A01GXX7

      Remove the 2 screws.

    4. Detach the 2 claws to remove the seat climate control controller LH.

  19. REMOVE AIR FILTER

    A01GZQ4

    1. Detach the 2 claws to remove the air filter.

      Tech Tips

      Use the same procedure to remove the air filter on the other side.

  20. REMOVE REAR SEAT CLIMATE CONTROL BLOWER LH


    1. A01H06E

      Disconnect the connector.

    2. A01GWIC

      Remove the 3 nuts and rear seat climate control blower LH.

  21. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY RH

    A01H11VE02
    Text in Illustration
    *1 Hook

    1. Using a clip remover, remove the clip.

    2. Detach the 2 hooks.

    3. Remove the 19 hog rings and rear seat cushion spring assembly RH from the rear seat cushion cover with pad RH.

  22. REMOVE REAR SEAT CUSHION PAD A


    1. A01H1ZP

      Remove the 2 nuts and rear seat cushion pad A.

  23. REMOVE REAR SEAT CUSHION PAD B


    1. A01GWME

      Remove the 2 nuts and rear seat cushion pad B.

  24. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH


    1. Remove the 18 hog rings and detach the 2 pieces of fastening tape.

    2. Detach the 10 claws to remove the separate type rear seat cushion cover RH.

      A01GXH0E03
      Text in Illustration
      *1 Fastening Tape - -

  25. REMOVE REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedures described for the LH side.

  26. REMOVE REAR SEAT CLIMATE CONTROL ECU RH

    Tech Tips

    Use the same procedures described for the LH side.

  27. REMOVE REAR SEAT COVER CAP RH

    Tech Tips

    Use the same procedures described for the LH side.

  28. REMOVE REAR SEAT LOCK BASE RH

    Tech Tips

    Use the same procedures described for the LH side.

  29. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER RH

    Tech Tips

    Use the same procedures described for the LH side.

  30. REMOVE REAR SEATBACK COVER WITH PAD RH


    1. Remove the nut and detach the seatback cover bracket.

    2. Disconnect the connector.

    3. Detach the 7 hooks and remove the 20 hog rings and rear seatback cover with pad RH from the rear seatback spring assembly RH.

      A01GY4FE02
      Text in Illustration
      *1 Seatback Cover Bracket *2 Hook

  31. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH


    1. Remove the 22 hog rings and separate type rear seatback cover RH from the rear seatback pad RH.

      A01H26W

  32. REMOVE REAR SEAT WIRE RH

    A01GY6I

    1. Disconnect the 3 connectors.

    2. Detach the 11 wire harness clamps to remove the rear seat wire RH.

  33. REMOVE SUB SEATBACK PLATE SUB-ASSEMBLY


    1. A01H101

      Detach the 2 claws to disconnect the 2 air hoses.

    2. Detach the 2 clamps to remove the upper part of the sub seatback plate sub-assembly.

    3. A01GXB7

      Detach the 2 hose clamps to disconnect the air hose.

    4. Detach the 4 clamps to remove the lower part of the sub seatback plate sub-assembly.

  34. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    1. A01GWWQE02

      w/o Illumination:

      Remove the bolt and rear seat inner belt assembly RH.

    2. A01GZ45

      w/ Illumination:


      1. Disconnect the connector and detach the 2 clamps.

      2. Remove the bolt and rear seat inner belt assembly RH.

  35. REMOVE REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH


    1. A01H04F

      Remove the nut and rear seat belt inner anchor bracket assembly RH.

  36. REMOVE SEAT CLIMATE CONTROL CONTROLLER RH

    Tech Tips

    Use the same procedures described for the LH side.

  37. REMOVE REAR SEAT CLIMATE CONTROL BLOWER RH

    Tech Tips

    Use the same procedures described for the LH side.

  38. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY (w/ Center Seat)


    1. Remove the 23 hog rings.

    2. Detach the fastening tape to remove the center seat cushion cover.

      A01GW4HE02
      Text in Illustration
      *1 Fastening Tape - -

  39. REMOVE REAR CENTER SEAT CUSHION PAD (w/ Center Seat)


    1. Remove the rear center seat cushion pad from the rear center seat cushion frame.

  40. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (w/ Center Seat)


    1. A01GYK9

      Remove the 2 bolts and rear center seat headrest assembly.

  41. REMOVE REAR SEAT ARMREST HOLE COVER (w/ Center Seat)


    1. A01H09S

      Detach the 2 clips to remove the rear seat armrest hole cover.

  42. REMOVE CENTER SEATBACK FRAME SUB-ASSEMBLY (w/ Center Seat)


    1. A01GYLH

      Detach the wire harness clamp.

    2. Remove the 2 nuts and center seatback frame sub-assembly from the rear seat center armrest assembly.

  43. REMOVE TELEVISION SWITCH AND VOLUME ASSEMBLY (w/ Center Seat)


    1. Remove the television switch and volume assembly.

  44. REMOVE REAR NO. 1 SEAT CENTER ARMREST PANEL (w/ Center Seat)


    1. A01GW9ZE01

      Using moulding remover A, detach the 8 claws and 3 guides to remove the rear No. 1 seat center armrest panel together with the rear seat armrest hole board as indicated by the arrows in the order shown in the illustration.

    2. Disconnect the 2 connectors.

    3. A01H0QD

      Remove the 3 screws and rear No. 1 seat center armrest panel from the rear seat armrest hole board.

  45. REMOVE REAR POWER SEAT SWITCH (w/ Center Seat)


    1. A01GWNC

      Remove the 4 screws and rear power seat switch.

  46. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (w/ Center Seat)


    1. A01H0PX

      Remove the 2 screws and rear seat center armrest cup holder sub-assembly.

  47. REMOVE SEAT VIBRATOR SWITCH (w/ Center Seat)


    1. A01H03L

      Remove the 2 screws and seat vibrator switch.

    2. Disconnect the connector.

      Tech Tips

      Use the same procedure to remove the seat vibrator switch on the other side.

  48. REMOVE HEADPHONE TERMINAL (w/ Center Seat)


    1. Disconnect each connector.

    2. A01H183

      Using a moulding remover B, detach the 8 claws and remove the bezel.

    3. A01GXQ3

      Detach the 6 claws and remove the 2 headphone terminals.