Click here

INSTRUMENT PANEL SAFETY PAD REASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Attach the 4 claws to install the No. 1 instrument panel register assembly.

  2. Click here

    INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Attach the 4 claws to install the No. 2 instrument panel register assembly.

  3. Click here

    INSTALL NO. 1 METER HOOD RETAINER


    1. Install the 2 No. 1 meter hood retainers with the 2 screws.

  4. Click here

    INSTALL NO. 1 INSTRUMENT PANEL PIN

    Tip:

    Use the same procedure to install the No. 1 instrument panel pin on the other side.


    1. Install the No. 1 instrument panel pin with the screw.

  5. Click here

    INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. Attach the 5 wire harness clamps to install the No. 2 instrument panel wire.

  6. Click here

    INSTALL AUTOMATIC LIGHT CONTROL SENSOR


    1. Attach the 2 claws to install the automatic light control sensor.

    2. Connect the connector.

  7. Click here

    INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. Attach the 4 clamps.

    2. Install the navigation antenna assembly with the 2 screws.

  8. Click here

    INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    1. Attach the 5 hooks (A).

      Table 1. Text in Illustration
      *1 Hook (A)
      *2 Hook (B)

    2. Push the front passenger airbag assembly to attach the 5 hooks (B).

    3. Install the 2 screws.

  9. Click here

    INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. Connect the 2 airbag connectors.

      Note:

      • When connecting airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    2. Push in the lock to connect the airbag connector.

    3. Attach the clamp to install the No. 2 instrument panel wire to the front passenger airbag assembly.

  10. Click here

    INSTALL ION GENERATOR SUB-ASSEMBLY


    1. Install the ion generator sub-assembly with the 2 screws.

    2. Connect the connector and heater to register duct.

  11. Click here

    INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. Install the No. 2 heater to register duct with the 2 screws.

    2. Connect the hose to the ion generator sub-assembly.

  12. Click here

    INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Install the defroster nozzle assembly with the 3 screws.

  13. Click here

    INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. Install the No. 3 heater to register duct with the 3 screws.

  14. Click here

    INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. Install the No. 1 heater to register duct with the 3 screws.

  15. Click here

    INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the claw to install the No. 2 side defroster nozzle duct.

    2. Install the screw.

  16. Click here

    INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the claw to install the No. 1 side defroster nozzle duct.

    2. Install the screw.

  17. Click here

    INSTALL NO. 1 COMBINATION METER BRACKET


    1. Install the No. 1 combination meter bracket.