POWER MIRROR CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use the following procedures to troubleshoot the power mirror control system.

  • *: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT AUXILIARY BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.


    NEXT

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Result:
      Result Proceed to
      CAN DTC is not output A
      CAN DTC is output (for LHD) B
      CAN DTC is output (for RHD) C

      B

      Go to CAN COMMUNICATION SYSTEM (for LHD) Click here

      C

      Go to CAN COMMUNICATION SYSTEM (for RHD) Click here

      A

  4. PROBLEM SYMPTOMS TABLE

    Result:
    Result Proceed to
    Fault is not listed in problem symptoms table A
    Fault is listed in problem symptoms table B

    B

    Go to step 7
    A

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Operation Check Click here

    2. Data List / Active Test Click here

    3. Terminals of ECU Click here


      NEXT

  6. ADJUST, REPAIR OR REPLACE


    NEXT

  7. CONFIRMATION TEST


    NEXT
    END