OUTER REAR VIEW MIRROR GLASS REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE OUTER MIRROR LH


    1. A01GXS8E01

      Apply protective tape to the areas shown in the illustration.

    2. Push the upper part of the mirror surface and tilt it.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover D

    3. Using a moulding remover D, detach the 2 claws at the upper part of the outer rear view mirror as shown in the illustration.

    4. A01GY3OE01

      Push the lower part of the mirror surface and tilt it.

    5. Apply protective tape to the areas shown in the illustration.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover D

    6. Using a moulding remover D, detach the 2 claws at the upper part of the outer rear view mirror as shown in the illustration.

    7. A01GYVL

      w/ Blind Spot Monitor:


      1. Detach the 2 clamps.

      2. Disconnect the 4 connectors and remove the outer mirror LH.

    8. A01GWBR

      w/o Blind Spot Monitor:


      1. Detach the clamps.

      2. Disconnect the 3 connectors and remove the outer mirror LH.