POWER WINDOW REGULATOR MOTOR (for Front Door) INSPECTION


  1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    1. A01H0E0E01

      Apply positive (+) battery voltage to the connector terminal 2(B).

      Note

      Do not apply positive (+) battery voltage to any terminals, except terminal 2(B), to avoid damaging the pulse sensor inside the motor.

    2. Apply negative (-) battery voltage to the connector terminals 1(E) and 7(DWN1) / 10(UP1).

    3. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2(B)

      Battery negative (-):

      1(E) (3 seconds or more) → 1(E) and 10(UP1) (within 1 second) → 1(E) (within 1 second) → 1(E) and 10(UP1)

      		 Motor gear rotates clockwise (UP)

      Battery positive (+) → 2(B)

      Battery negative (-):

      1(E) (3 seconds or more) → 1(E) and 7(DWN1) (within 1 second) → 1(E) (within 1 second) → 1(E) and 7(DWN1)

      		 Motor gear rotates counterclockwise (DOWN)

      • If the result is not as specified, replace the power window regulator motor assembly.

      CAUTION:

      Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door.

  2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    1. A01H0F8E01

      Apply positive (+) battery voltage to the connector terminal 2(B).

      Note

      Do not apply positive (+) battery voltage to any terminals, except terminal 2(B), to avoid damaging the pulse sensor inside the motor.

    2. Apply negative (-) battery voltage to the connector terminals 1(E) and 7(DWN1) / 10(UP1).

    3. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2(B)

      Battery negative (-):

      1(E) (3 seconds or more) → 1(E) and 10(UP1) (within 1 second) → 1(E) (within 1 second) → 1(E) and 10(UP1)

      		 Motor gear rotates counterclockwise (UP)

      Battery positive (+) → 2(B)

      Battery negative (-):

      1(E) (3 seconds or more) → 1(E) and 7(DWN1) (within 1 second) → 1(E) (within 1 second) → 1(E) and 7(DWN1)

      		 Motor gear rotates clockwise (DOWN)

      • If the result is not as specified, replace the power window regulator motor assembly.

      CAUTION:

      Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door.