WINDSHIELD DEICER SYSTEM DATA LIST / ACTIVE TEST


  1. ACTIVE TEST

    Tech Tips

    Using the GTS to Perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Turn the power switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Air Conditioner / Active Test /

    6. According to the display on the GTS, perform the "Active Test".

      Air Conditioner
      Tester Display Test Part Control Range Diagnostic Note
      Deicer Relay (Front) DEICER relay operation OFF / ON -