POWER WINDOW CONTROL SYSTEM Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

• When the front doors are closed, each power window regulator motor can control its power window operation for approximately 45 seconds after the power switch is turned from ON (IG) to OFF by receiving operation permission signals from the main body ECU.

• However, when approximately 45 seconds have elapsed, or the driver side door or front passenger side door is opened within approximately 45 seconds of the power switch being turned OFF, the power window regulator motor stops operating.

• During the AUTO function operation, when 45 seconds have passed and key-off operation is prohibited, the window operation stops immediately.

• The front passenger side power window and the rear power windows cannot be operated when the window lock switch is pressed.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK LIN COMMUNICATION SYSTEM

   
   

   1. Check for LIN communication system DTCs related to the power window control system.

      Result:

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   
   

   B

   GO TO LIN COMMUNICATION SYSTEM Click here

   A

2. CHECK AND REPLACE POWER WINDOW OPERATION FUNCTION AFTER POWER SWITCH OFF

   
   

   1. Check the power window operation function after the power switch is turned OFF.

      Result:

      Result	Proceed to
      Driver side door or front passenger side door is opened within 45 seconds but power window can still operate	A
      45 seconds pass and the power windows can still operate	B

   
   

   B

   REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)

   A

3. READ VALUE USING INTELLIGENT TESTER (DOOR COURTESY SWITCH)

   
   

   1. Use the Data List to check if the main body ECU is functioning properly.

      Main Body:

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      D Door Courtesy SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
      P Door Courtesy SW	Front passenger side door courtesy switch signal / ON or OFF	ON: Front passenger door open OFF: Front passenger door closed	-

      OK
      Tester display changes normally when door courtesy switch is operated.

   
   

   NG

   CHECK FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY Click here

   OK

   REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)

4. CHECK FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

   
   

   1. Open the driver side door and check that the map light illuminates.

      OK
      Map light illuminates.

   2. Open the front passenger side door and check that the map light illuminates.

      OK
      Map light illuminates.

   
   

   NG

   REPLACE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY Click here

   OK

   REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)