CIGARETTE LIGHTER (for Instrument Panel Side) INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL CIGARETTE LIGHTER BEZEL STAY


    1. Attach the 2 claws to install the cigarette lighter bezel stay to the upper console panel sub-assembly.

  2. INSTALL CIGARETTE LIGHTER ASSEMBLY


    1. A01GYX0

      Attach the claw to install the cigarette lighter socket.

    2. Install the cigarette lighter knob and element assembly.

  3. INSTALL CIGARETTE LIGHTER COVER


    1. Attach the 2 claws to install the cigarette lighter cover.

    2. A01H1QJ

      Install the wire harness clamp to the connector.

    3. Connect the connector and attach the wire harness clamp.

  4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Attach the 6 clips to install the upper console panel sub-assembly.

    2. Connect the connector.

  5. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. Attach the 5 clips to install the upper instrument cluster finish panel.

  6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    A01H1P8

    1. Connect each connector and attach each wire harness clamp.

    2. Attach the 6 clips to install the upper rear console panel sub-assembly.

    3. Install the 2 screws.

  7. INSTALL NO. 3 BOX PANEL


    1. Attach the 4 claws to install the No. 3 box panel.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A01GZSN

    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the rear part of the instrument panel finish panel end LH 3 clips.

    2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Tech Tips

    Use the same procedure described for the LH side.