REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (w/o Rear Seat Entertainment System)
Using moulding remover B, detach the 5 clips and 2 claws and remove the rear console end panel sub-assembly.
Disconnect the connector.
REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (w/ Disc Player)
Detach the 4 clips and remove the upper No. 1 console panel garnish.
REMOVE REAR NO. 1 CONSOLE END PANEL GARNISH (w/ Disc Player)
Detach the 3 clips and 3 guides and remove the rear No. 1 console end panel garnish.
REMOVE REAR NO. 2 CONSOLE END PANEL GARNISH (w/ Disc Player)
Detach the 3 clips and 3 guides and remove the rear No. 2 console end panel garnish.
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (w/ Disc Player)
Remove the 2 screws.
Detach the 2 clips and remove the rear console end panel sub-assembly.
REMOVE REAR CONSOLE END PANEL (w/ Disc Player)
Detach the 2 clips and 2 hooks and remove the rear console end panel.
Disconnect each connector and detach the wire harness clamp.
REMOVE REAR CIGARETTE LIGHTER COVER
w/o Rear Seat Entertainment System:
Disconnect the connector and detach the wire harness clamp.
Detach the 2 claws and remove the rear cigarette lighter cover.
w/ Disc Player:
Cut off the cable tie.
| *1 | Cable Tie |
Disconnect the connector.
Detach the 2 claws and remove the rear cigarette lighter cover.
REMOVE REAR CIGARETTE LIGHTER ASSEMBLY
Remove the cigarette lighter knob and element assembly.
w/o Rear Seat Entertainment System:
Using a screwdriver, detach the claw and remove the socket cap.
w/ Disc Player:
Disconnect the connector.
Using a screwdriver, detach the claw and remove the socket cap.
REMOVE REAR CIGARETTE LIGHTER BEZEL STAY
w/o Rear Seat Entertainment System:
Detach the 2 claws and remove the rear cigarette lighter bezel stay together with the cigarette lighter hole bezel from the rear console end panel sub-assembly.
w/ Disc Player:
Detach the 2 claws and remove the rear cigarette lighter bezel stay from the rear console end panel.
REMOVE CIGARETTE LIGHTER HOLE BEZEL (w/o Rear Seat Entertainment System)
Detach the 2 claws and remove the cigarette lighter hole bezel from the cigarette lighter hole bezel stay.