LOW PITCHED HORN REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. A01GWZN

      for LHD:

      Remove the 5 clips and engine room side cover LH.

    2. A01GXEIE01

      for RHD:

      Remove the 5 clips and engine room side cover LH.

      Note

      Remove the clip labeled A by turning it to prevent the engine room side cover LH and bracket from being damaged.

      Tech Tips

      The clip labeled A cannot be removed from the engine room side cover LH.

  2. REMOVE ENGINE ROOM SIDE COVER RH


    1. A01GWGRE01

      for LHD:

      Remove the 5 clips and engine room side cover RH.

      Note

      Remove the clip labeled A by turning it to prevent the engine room side cover RH and bracket from being damaged.

      Tech Tips

      The clip labeled A cannot be removed from the engine room side cover RH.

    2. A01H09J

      for RHD:

      Remove the 5 clips and engine room side cover RH.

  3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GWDEE01

      Remove the 5 clips labeled A.

    2. Lift up the air cleaner inlet cover sub-assembly to detach the 4 clips labeled B, and remove the air cleaner inlet cover sub-assembly.

  4. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01GXJI

      Remove the 4 clips and cool air intake duct seal.

  5. REMOVE LOW PITCHED HORN ASSEMBLY


    1. A01H16R

      for Type A:


      1. Remove the bolt and horn.

      2. Disconnect the horn connector.

    2. A01GX57

      for Type B:


      1. Remove the bolt and horn.

      2. Disconnect the horn connector.