BLIND SPOT MONITOR MAIN SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL OUTER MIRROR SWITCH ASSEMBLY


    1. Attach the 4 claws to install the outer mirror switch assembly (blind spot monitor main switch).

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 5 clips and claw to install the No. 1 instrument panel safety pad sub-assembly.

    3. Install the screw <C> and bolt.

    4. A01GX5F

      Attach the claw to install the switch base hole cover to the No. 1 instrument panel safety pad sub-assembly.

  3. INSTALL INSTRUMENT PANEL ORNAMENT

    A01GXLS

    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel ornament.

  4. INSTALL INSTRUMENT SIDE PANEL LH

    A01H1M2

    1. Attach the 6 clips to install the instrument side panel LH.