NIGHT VIEW MAIN SWITCH INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL TRIP SWITCH


    1. Attach the 2 claws to install the trip switch.

  2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect the 2 connectors.

    2. A01GXHI

      Attach the 6 clips to install the No. 2 instrument cluster finish panel sub-assembly.

    3. Install the 2 clips.

  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 5 clips and claw to install the No. 1 instrument panel safety pad sub-assembly.

    3. Install the screw <C> and bolt.

    4. A01GX5F

      Attach the claw to install the switch base hole cover to the No. 1 instrument panel safety pad sub-assembly.

  4. INSTALL INSTRUMENT PANEL ORNAMENT

    A01GXLS

    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel ornament.

  5. INSTALL INSTRUMENT SIDE PANEL LH

    A01H1M2

    1. Attach the 6 clips to install the instrument side panel LH.

  6. ENABLE AUTO TILT AWAY FUNCTION

    Note

    Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.