NIGHT VIEW ECU INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

INSTALL NO. 1 NIGHT VIEW ECU

Note

Do not use a No. 1 night view ECU which has been dropped or subjected to any strong shocks.
1. Install the No. 1 night view ECU with the 3 nuts.
2. Attach the wire harness clamp.
3. Connect the 2 connectors.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
1. Install the luggage compartment trim cover assembly RH with the claw and 2 clips.
INSTALL REAR FLOOR FINISH PLATE
1. Attach the 4 clips to install the rear floor finish plate.
2. Install the 3 clips.
INSTALL TOOL BOX (w/o Spare Tire)
1. Install the tool box with the 2 clips.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
1. Text in Illustration
  
  *A w/o Rear Cooler
  
  *B w/ Rear Cooler
  
  Attach the 4 claws to install the front luggage compartment trim cover.
2. Install the 3 clips.
INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)
1. Attach the 5 clips to install the No. 1 cooler cover.
INSTALL ROPE HOOK
1. Install the 4 rope hooks.
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 2 claws to Install the No. 1 luggage compartment light assembly.

Text in Illustration
*A	w/o Rear Cooler
*B	w/ Rear Cooler

INSTALL DECK TRIM SIDE BOARD RH

Text in Illustration
*A	w/ Spare Tire
*B	w/o Spare Tire

w/ Spare Tire:

INSTALL ROPE HOOK ASSEMBLY
1. Install the 4 rope hook assemblies with the 4 bolts.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)
ADJUST NIGHT VIEW CAMERA ASSEMBLY

Click here.

Text in Illustration
*A	for Standard
*B	for Ottoman