PARKING ASSIST MONITOR SYSTEM DIAGNOSIS SYSTEM


  1. PARKING ASSIST MONITOR DIAGNOSIS SYSTEM


    1. For parking assist monitor system diagnosis, signals received by the multi-media module receiver assembly can be checked and the parking assist monitor system can be calibrated, adjusted and checked using the multi-media module receiver assembly.

      Note

      Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

      Tech Tips

      The displayed items may differ depending on vehicle specifications.

  2. DIAGNOSIS SCREEN TRANSITION (during parking assist monitor system initialization)

    A01GWAT
    A01GZGO

  3. DIAGNOSIS SCREEN TRANSITION (after parking assist monitor system initialization)

    A01H0AC
    A01H1C0

  4. VEHICLE SIGNAL CHECK


    1. Start diagnostic mode.


    2. A01GXEY

      Select "Function Check/Setting" on the Service Menu screen to display the Function Check/Setting screen.

    3. A01GX7X

      Select "Vehicle Signal" on the Function Check/Setting screen.

    4. A01H1X0

      Vehicle Signal Check Mode


      1. When the "Vehicle Signal Check Mode" screen is displayed, check "REV" the vehicle signal conditions.

        Tech Tips


        • Only conditions having inputs are displayed.

        • This screen displays vehicle signals input to the multi-media module receiver assembly.

        • For details of this function, refer to Diagnosis Display Detailed Description in System Description Click here

    5. Finish diagnostic mode.


      1. Turn the power switch off.

  5. CAR SIGNAL CHECK (parking assist monitor system input signals)


    1. Start diagnostic mode.



      1. A01GXEY

        Select "Function Check/Setting" on the Service Menu screen to display the Function Check/Setting screen.

      2. A01GX7X

        Select "Camera Setting" on the Function Check/Setting screen.

      3. A01GXIY

        Select "Next" on the Car Information Check screen.

        Tech Tips

        After "Next" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system was performed after the multi-media module receiver assembly was replaced.

        Parking Assist Monitor System Initialization Screen Transition
        Not performed Car Signal Check screen
        Performed Mode Setting screen
      4. A01H249

        When the screen changes to the Mode Setting screen, select "Back Camera Setting" to display the Car Signal Check screen.

        Tech Tips

        To select a grayed out item, select and hold the item for 2 seconds or more.

    2. A01GZPI

      Car Signal Check


      1. On the Car Signal Check screen, it is possible to inspect the state of signals and check the settings.

        Item Inspection Detail Note
        BCTY Luggage compartment door courtesy light switch signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.

        Tech Tips


        • When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.

        • If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".

    3. BCTY inspection

      Tech Tips

      If "CHK" (red) is displayed for "BCTY", check for DTCs and perform troubleshooting based on the output DTCs Click here.

    4. Finish diagnostic mode.


      1. Turn the power switch off.

  6. CALIBRATION WHEN SERVICING VEHICLE

    Note

    Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.