DESCRIPTION
The No. 1 ultrasonic sensor (rear left corner sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the rear left corner sensor. If the rear left corner sensor has an open circuit or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE6 | Malfunction of No. 1 ultrasonic sensor (Rear left corner sensor) |
|
INSPECTION PROCEDURE
If the DTC is output after repairs, turn the power switch on (IG) and move the shift lever to R. Then clear the DTC.
PROCEDURE
CHECK DTC OUTPUT
Clear the DTCs (see pageClick here).
Check for DTCs (see pageClick here).
| Result | Proceed to |
|---|---|
| DTC C1AE6 is output | A |
| No DTC is output | B |
REPLACE NO. 1 ULTRASONIC SENSOR (REAR LEFT CORNER SENSOR)
Replace the ultrasonic sensor (see pageClick here) with a normally functioning sensor.
CHECK DTC OUTPUT
Clear the DTCs (see pageClick here).
Check for DTCs (see pageClick here).
| OK |
|---|
| DTC C1AE6 is not output. |
USE SIMULATION METHOD TO CHECKClick here
END (NO. 1 ULTRASONIC SENSOR [REAR LEFT CORNER SENSOR] IS DEFECTIVE)
REPLACE CLEARANCE WARNING ECUClick here