Click here

NAVIGATION ANTENNA INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. Attach the 4 clamps.

    2. Install the navigation antenna assembly with the 2 screws.

  2. Click here

    INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. Install the No. 3 heater to register duct with the 3 screws.

  3. Click here

    INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Install the defroster nozzle assembly with the 3 screws.

  4. Click here

    INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the claw to install the No. 2 side defroster nozzle duct.

    2. Install the screw.

  5. Click here

    INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    (Click here)

  6. Click here

    CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02

      Attach the battery service hole cover LH with the clip and fastening tape.

      Table 1. Text in Illustration
      *A for Standard
      *B for Ottoman
  8. Click here

    INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  9. Click here

    INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  10. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

  11. Click here

    CHECK SRS WARNING LIGHT

    (Click here)