HARD DISK DRIVE REMOVAL


  1. PRECAUTION

    Note


    • Precautions for multi-media module receiver assembly and hard disc Click here.

    CAUTION:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  4. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Detach the 2 clips and remove the deck trim side board LH.

  5. REMOVE BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman
      *1 Fastening Tape

      Detach the clip, fastening tape and remove the battery service hole cover LH.

  6. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  8. REMOVE NO. 2 RADIO BRACKET


    1. A01GWWI

      Remove the 3 bolts and No. 2 radio bracket.

  9. REMOVE HARD DISC


    1. A01GYKM

      Remove the 2 screws.

    2. Detach the 2 claws and remove the cover.

    3. A01H0UI

      Remove the hard disc in the direction of the arrow shown in the illustration.