RADIO ANTENNA CORD INSTALLATION

Tech Tips

Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.

INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY
1. Attach the 6 clamps and install the No. 3 antenna cord sub-assembly.
2. Connect each connector.
  
  Text in Illustration
  
  *a w/ Digital Audio Broadcasting - -
INSTALL ROOF HEADLINING ASSEMBLY
1. for Standard Body:
  
  Click here
2. for Long Body:
  
  Click here
INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
1. for Long Body:
  1. Attach the 13 clamps.
  2. Install the 2 bolts.
    
    Torque:
    
    8.4 N*m { 86 kgf*cm, 74 in.*lbf }
  3. Connect each connector and install the No. 2 antenna cord sub-assembly.
2. for Standard Body:
  1. Attach the 12 clamps.
  2. Install the 2 bolts.
    
    Torque:
    
    8.4 N*m { 86 kgf*cm, 74 in.*lbf }
  3. Connect each connector and install the No. 2 antenna cord sub-assembly.
INSTALL ROOF SIDE GARNISH INNER RH

Click here
INSTALL REAR SEAT ASSEMBLY
1. for Power Seat:
  
  Click here
2. for 4-Passenger with Ottoman:
  
  Click here
3. for 5-Passenger with Ottoman:
  
  Click here
4. for Fixed Seat:
  
  Click here
INSTALL FRONT SEAT ASSEMBLY RH

Click here
INSTALL FRONT CONSOLE BOX ASSEMBLY
1. w/o Rear Entertainment System:
  
  Click here
2. for 5-Passenger with Ottoman:
  
  Click here
3. w/ Disc Player:
  
  Click here
INSTALL ANTENNA CORD SUB-ASSEMBLY
1. Attach the 2 clamps to install the antenna cord sub-assembly.
2. Connect each connector.
INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY
1. Connect the connectors.
2. Insert the multi-media module receiver assembly with bracket.
  
  Note
  
  When inserting the radio receiver, do not press the knobs on it.
3. Attach the 6 clips.
4. Install the multi-media module receiver assembly with bracket with the 2 bolts.
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
1. Connect the connector.
2. Attach the 5 guides and 4 clips to install the lower No. 1 instrument panel finish panel.
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
1. Attach the 5 guides and 4 clips to install the lower No. 2 instrument panel finish panel.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Attach the 6 clips to install the upper console panel sub-assembly.
2. Connect the connector.
INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
1. Attach the 5 clips to install the upper instrument cluster finish panel.
INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
1. Connect each connector and attach each wire harness clamp.
2. Attach the 6 clips to install the upper rear console panel sub-assembly.
3. Install the 2 screws.
INSTALL NO. 3 BOX PANEL
1. Attach the 4 claws to install the No. 3 box panel.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow to install it.
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
1. Attach the rear part of the instrument panel finish panel end LH 3 clips.
2. Attach the front part of the instrument panel finish panel end LH 6 clips to install the instrument panel finish panel end LH.
INSTALL INSTRUMENT PANEL FINISH PANEL END RH

Tech Tips

Use the same procedure described for the LH side.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL BATTERY SERVICE HOLE COVER LH
1. Text in Illustration
  
  *A for Standard
  
  *B for Ottoman
  
  Attach the battery service hole cover LH with the clip and fastening tape.
INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)
1. Attach the 2 clips to install the deck trim side board LH.
INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

Text in Illustration
*A	for Standard
*B	for Ottoman