REMOVE UPPER REAR CONSOLE PANEL GARNISH
| *1 | Protective Tape |
Apply protective tape as shown in the illustration.
Move the shift lever to N.
Remove the 2 screws.
Detach the 6 clips and remove the upper rear console panel sub-assembly.
Disconnect each connector and detach each wire harness clamp.
REMOVE REAR CONSOLE BOX GARNISH
| *1 | Protective Tape |
Put protective tape as shown in the illustration.
using moulding remover A, detach the 2 clips and remove the rear console box garnish.
REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH
Remove the 2 screws and move the upper No. 1 console panel garnish in the direction of the arrow to remove it.
REMOVE REAR NO. 1 CONSOLE END PANEL GARNISH
Remove the 2 screws.
Detach the 2 clips and 4 guides, and then remove the rear No. 1 console end panel garnish.
REMOVE REAR NO. 2 CONSOLE END PANEL GARNISH
Tech Tips
Use the same procedure described for the rear No. 1 console end panel garnish.
REMOVE TELEVISION DISPLAY ASSEMBLY
Disconnect each connector.
Remove the 2 clips, 4 bolts and television display.
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Remove the 3 screws.
Detach the 2 clips and remove the rear console end panel sub-assembly.
REMOVE DISC PLAYER ASSEMBLY
Disconnect each connector.
Remove the 6 bolts and disc player assembly as shown in the illustration.
REMOVE NO. 1 DISC PLAYER BRACKET
Remove the 2 bolts and No. 1 disc player bracket.
REMOVE NO. 2 DISC PLAYER BRACKET
Remove the 2 bolts and No. 2 disc player bracket.