REAR DOOR SPEAKER (for Long Body) INSTALLATION

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone of the speaker.


    1. Align the speaker to the door position pins A.

    2. A01GXE5E01

      Install the rear No. 3 speaker assembly with the 2 screws.

    3. Attach the clamp and connect the connector.

  2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone of the speaker.


    1. A01GZK1E01

      Temporarily install the speaker by attaching the claws of the speaker to the door panel.

    2. Install the rear No. 2 speaker assembly with the 3 screws.

      Tech Tips

      Install the screws in the order shown in the illustration.

    3. Connect the connector.

  3. INSTALL REAR NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the cone of the speaker.


    1. Install the rear No. 1 speaker assembly and attach the clip.

    2. Install the 2 screws.

      A01H226E03
      Text in Illustration
      *A for Standard *B for 19 Speakers

    3. Connect the connector.

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Rear Door Sunshade)


    1. for Long Body:


      1. A01GXAA

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 14 clips.

    2. for Standard Body:


      1. A01GXAA

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 12 clips.

  5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. for Long Body:


      1. A01GXAA

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim board sub-assembly LH with the 3 screws and 13 clips.

    2. for Standard Body:


      1. A01GXAA

        Connect the 2 cables to the inside handle.

      2. Connect the connector.

      3. Install the rear door trim with the 3 screws and 11 clips.

  6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    A01GXK8

    1. Install the illumination light with the screw.

    2. Connect the connector.

    3. Attach the 2 clips to install the rear power window regulator switch assembly with rear door armrest base panel.

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the rear door inside handle bezel plug LH.