REAR DOOR SPEAKER (for Long Body) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    1. A01GYVW

      Using a screwdriver, detach the 3 claws and remove the rear door inside handle bezel plug LH.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    A01GZMDE01

    1. Apply protective tape to the area around the rear power window regulator switch assembly with rear door armrest base panel.

    2. Using a clip remover, detach the 2 clips in the order shown in the illustration.

      Text in Illustration
      *1 Protective Tape
    3. A01GXAJ

      Disconnect the connector.

    4. Remove the screw and illumination light.

    5. Remove the rear power window regulator switch assembly with rear door armrest base panel.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01GWSK

      for Long Body:


      1. Remove the 3 screws.

      2. Detach the 13 clips.

        Note

        Do not use a tool to detach the clips of the rear door trim board sub-assembly LH.

      3. A01GZ7Y

        Disconnect the 2 cables from the inside handle.

      4. Disconnect the connectors and remove the trim board.

    2. A01H1GM

      for Standard Body:


      1. Remove the 3 screws.

      2. Detach the 11 clips.

        Note

        Do not use a tool to detach the clips of the rear door trim board sub-assembly LH.

      3. A01GZ7Y

        Disconnect the 2 cables from the inside handle.

      4. Disconnect the connectors and remove the trim board.

  4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (w/ Rear Door Sunshade)


    1. A01H024

      for Long Body:


      1. Remove the 3 screws.

      2. Detach the 14 clips.

        Note

        Do not use a tool to detach the clips of the rear door trim board sub-assembly LH.

      3. A01GZ7Y

        Disconnect the 2 cables from the inside handle.

      4. Disconnect the connectors and remove the rear door trim board sub-assembly LH.

    2. A01GYMJ

      for Standard Body:


      1. Remove the 3 screws.

      2. Detach the 12 clips.

        Note

        Do not use a tool to detach the clips of the rear door trim board sub-assembly LH.

      3. A01GZ7Y

        Disconnect the 2 cables from the inside handle.

      4. Disconnect the connectors and remove the rear door trim board sub-assembly LH.

  5. REMOVE REAR NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the cone of the speaker.


    1. Disconnect the connector.

    2. Remove the 2 screws.

      A01GWZ9E02
      Text in Illustration
      *A for Standard *B for 19 Speakers

    3. Detach the clip and remove the rear No. 1 speaker assembly.

  6. REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone of the speaker.


    1. A01GY0L

      Disconnect the connector.

    2. Remove the 3 screws.

    3. Detach the claw and remove the rear No. 2 speaker assembly.

  7. REMOVE REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone of the speaker.


    1. Disconnect the connector.

    2. A01H0SP

      Detach the clamp, and remove the 2 screws and rear No. 3 speaker assembly.