INSTRUMENT PANEL SPEAKER INSPECTION

INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

1. for Standard:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Front No. 2 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always Approx. 6 Ω

      If the result is not as specified, replace the front No. 2 speaker assembly.

2. for 19 Speakers:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Front No. 2 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always 5 to 7 Ω

      If the result is not as specified, replace the front No. 2 speaker assembly.

INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

1. for Standard:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Front No. 3 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always Approx. 6 Ω

      If the result is not as specified, replace the front No. 3 speaker assembly.

2. for 19 Speakers:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Front No. 3 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always 5 to 7 Ω

      If the result is not as specified, replace the front No. 3 speaker assembly.