PILLAR SPEAKER (for Quarter) INSTALLATION

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY (for 19 Speakers)

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. A01H081E01

      Install the rear header speaker assembly and attach the clip.

    3. Install the 2 bolts.

  2. INSTALL INNER ROOF SIDE GARNISH LH

    A01H0IUE06
    Text in Illustration
    *1 Clip A

    1. Install a new clip A to the inner roof side garnish LH.

    2. Attach the 2 claws and 5 clips to install the inner roof side garnish LH.

  3. INSTALL REAR SEAT SIDE GARNISH LH


    1. Attach the 6 claws to install the rear seat side garnish LH.

  4. INSTALL REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman Seat:

      Click here

    3. for fixed Seat:

      Click here

  5. INSTALL REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  6. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  9. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  11. CHECK SRS WARNING LIGHT

    Click here