| DTC Code | DTC Name |
|---|---|
| Sound Signal Circuit between Video Terminal and Television Display |
DESCRIPTION
This is the sound signal circuit between the video terminal and television display assembly.
INSPECTION PROCEDURE
PROCEDURE
CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - VIDEO TERMINAL)
*1: for 4-Passenger with Ottoman
*2: for 5-Passenger with Ottoman
*3: except Ottoman
Disconnect the R92*1, *3 or R112*2 television display assembly connector.
Disconnect the o1 rear console armrest base (video terminal) connector.*1
Disconnect the Y3*2 or S105*3 video terminal connector.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLEClick here
REPAIR OR REPLACE HARNESS OR CONNECTOR