This DTC is stored when a malfunction occurs in a connected device.
|DTC Code||DTC Detection Condition||Trouble Area|
USB Device Malfunction
CHECK USB DEVICE OR “iPod”
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the power switch off.
When this DTC has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the power switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions Click here.
Clear the DTCs Click here.
CHECK FOR DTC
Recheck for DTCs and check if the same DTC is output again Click here.
|No DTCs are output.|
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here