AUDIO AND VISUAL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY (for 12.3 Inch) or MULTI-DISPLAY (for 8 Inch)


    1. Turn the power switch on (IG).

    2. Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.

      Display Default Content Setting Relevant ECU
      Feedback Force 0 (middle bar) Feedback force setting of the remote touch* -2, -1, 0, +1 or +2 Multi-media module receiver assembly
      NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.