Click here

LIGHT CONTROL RHEOSTAT INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL LIGHT CONTROL RHEOSTAT


    1. Attach the 2 claws to install the light control rheostat to the No. 2 instrument cluster finish panel sub-assembly.

  2. Click here

    INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect the 2 connectors.

    2. A01GXHI

      Attach the 6 clips to install the No. 2 instrument cluster finish panel sub-assembly.

    3. Install the 2 clips.

  3. Click here

    INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 5 clips and claw to install the No. 1 instrument panel safety pad sub-assembly.

    3. Install the screw <C> and bolt.

    4. A01GX5F

      Attach the claw to install the switch base hole cover to the No. 1 instrument panel safety pad sub-assembly.

  4. Click here

    INSTALL INSTRUMENT PANEL ORNAMENT


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel ornament.

  5. Click here

    INSTALL INSTRUMENT SIDE PANEL LH


    1. Attach the 6 clips to install the instrument side panel LH.

  6. Click here

    ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter (Click here).