METER / GAUGE SYSTEM Hybrid System Indicator Malfunction

DESCRIPTION

The No. 1 meter ECU receives the power meter signal from the hybrid vehicle ECU via the CAN line.

WIRING DIAGRAM

A01GYEQE49

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Check for DTC Click here [for LHD], Click here [for RHD]).

      Result
      Result Proceed to
      DTC is not output A
      CAN communication system (for LHD) DTC is output B
      CAN communication system (for RHD) DTC is output C
      Hybrid control system is output D

    B

    Go to CAN COMMUNICATION SYSTEM Click here

    C

    Go to CAN COMMUNICATION SYSTEM Click here

    D

    Go to HYBRID CONTROL SYSTEM Click here

    A

  2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (HV SYSTEM INDICATOR)


    1. Operate the intelligent tester according to the display and select "Active Test".

      Combination Meter
      Tester Display Test Part Control Range
      HV System Indicator Hybrid system indicator MIN, -50, 0, 100, 200, 300, 400 or MAX (%)
      OK
      Needle indication is normal.

    NG

    REPLACE NO. 1 METER ECU Click here

    OK

    Go to HYBRID CONTROL SYSTEM Click here