LANE-KEEPING ASSIST SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch ON (IG).

    3. Tune the intelligent tester on.

    4. Enter the following menus: All ECUs / Lane Keep Assist / DTC.

    5. Read the DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch ON (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: All ECUs / Lane Keep Assist / DTC.

    5. Clear the DTCs.