REAR SEAT INNER BELT ASSEMBLY (for Fixed Seat Type) INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Illumination)

    A01H1HLE01

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1(+) - 2(E) Fasten the seat belt (buckle switch is ON) Below 1 Ω
        1(+) - 2(E) Release the seat belt (buckle switch is OFF) 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner belt assembly.

    2. Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the front seat inner belt and check that the LED illuminates.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → 3

        Auxiliary battery negative (-) → 4

        		 LED illuminates

        If the result is not as specified, replace the rear seat inner belt assembly.

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY CENTER (w/ Illumination)

    A01GZKKE02

    1. Check the buckle switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1(+) - 2(E) Fasten the seat belt (buckle switch is ON) Below 1 Ω
        1(+) - 2(E) Release the seat belt (buckle switch is OFF) 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner belt assembly center.

    2. Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the front seat inner belt and check that the LED illuminates.

        OK
        Condition Specified Condition

        Auxiliary battery positive (+) → 3

        Auxiliary battery negative (-) → 4

        		 LED illuminates

        If the result is not as specified, replace the rear seat inner belt assembly center.