FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    A01GX6QE02
    Text in Illustration
    *1 Protruding Part

    1. Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    2. Attach the claw to connect the connector.

    3. Attach the 6 wire harness clamps.

    4. Connect the 2 connectors.

      A01GXDJE01
      Text in Illustration
      *A for Driver Side *B for Front Passenger Side

  2. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  3. CHECK SRS WARNING LIGHT

    Click here