CHILD RESTRAINT SEAT TETHER ANCHOR REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE REAR SEAT ASSEMBLY


    1. for Power Seat:

      Click here

    2. for Ottoman:

      Click here

    3. for Fixed Seat Type:

      Click here

  2. REMOVE REAR DOOR SCUFF PLATE LH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  3. REMOVE REAR DOOR SCUFF PLATE RH


    1. for Standard Body:

      Click here

    2. for Long Body:

      Click here

  4. REMOVE REAR SEAT SIDE GARNISH LH

    A01GW72

    1. Detach the 6 claws and remove the rear seat side garnish LH.

  5. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE INNER ROOF SIDE GARNISH LH

    A01GW31E10
    Text in Illustration
    *1 Clip A

    1. Pull the inner roof side garnish LH away from the body to detach the 4 clips (do not detach clip A).

    2. Detach the 2 claws of the guide, and pull the inner roof side garnish LH in the direction of the arrow to remove it.

      Tech Tips

      Clip A remains attached to the body.

    3. Remove clip A from the vehicle body.

  7. REMOVE INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    A01GZ0Q

    1. Detach the 2 clips and 2 claws, and remove the child restraint seat tether anchor cover.

  9. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. A01GWDN

      except 4-Passenger with Ottoman:

      Using a moulding remover D, detach the 4 claws and remove the 3 belt guides.

    2. for 4-Passenger with Ottoman:

      Using a moulding remover D, detach the 4 claws and remove the 2 belt guides.

    3. A01GY1H

      except 4-Passenger with Ottoman:

      Detach the 2 clips of the package tray trim panel assembly. Then pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.

    4. A01H1AU

      for 4-Passenger with Ottoman:

      Detach the 2 clips of the package tray trim panel assembly. Then pass the 2 rear seat belt floor anchors through the package tray trim panel assembly.

    5. Disconnect the solar sensor connector and remove the package tray trim panel.

  10. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

    A01H21X

    1. except 4-Passenger with Ottoman:

      Remove the 3 bolts and 3 child restraint seat tether anchor brackets.

    2. for 4-Passenger with Ottoman:

      Remove the 2 bolts and 2 child restraint seat tether anchor brackets.